| Grade |
Insert Material |
Coating |
ANSI |
ISO |
Workpiece Materials |
Description / Application |
| PH0705 |
CARBIDE |
UNCOATED |
|
K10-K30, S10-S30 |
Cast Iron, High-Temp Alloys |
Uncoated carbide with fine-grain substrate suitable for machining of nodular cast irons & light alloys. |
| PH0910 |
CARBIDE |
UNCOATED |
|
N01-N20 |
Non-Ferrous Materials |
Uncoated carbide micrograin grade combining a good abrasive wear resistance and thoughness. Suitable for rough to finish turning of HRSA, Titanium alloys, cast irons and Aluminium alloys. |
| PH2115 |
CARBIDE |
CVD TiN Al2O3 TiC,N |
|
P01-P30, K10-K25 |
Steel, Cast Iron |
CVD coating with large thickness. Carbide grade with a gradient layer close to the surface. Suitable for small to medium cutting speeds on steels, cast steels & cast irons. |
| PH2125 |
CARBIDE |
CVD TiN Al2O3 TiC,N |
|
P10-P35 |
Steel |
CVD coating with very large thickness. Suitable for roughing of steels & cast steels at small to medium cutting speeds. |
| PH2135 |
CARBIDE |
CVD TiN Al2O3 TiC,N |
|
P20-P40 |
Steel |
CVD coated grade with Alumina composition. Good performance under heavy cutting conditions of steels & cast steels from low to moderate cutting speeds. |
| PH2320 |
CARBIDE |
CVD TiN Al2O3 TiC,N |
|
K01-K25 |
Cast Iron |
CVD coated grade with a thick and smooth wear resistant coating and a hard substrate capable of withstanding interrupted conditions. Recommended as general choice for roughing of all cast irons at low to medium cutting speeds. |
| PH2705 |
CARBIDE |
CVD TiN Al2O3 TiC,N |
|
K05-K15 |
Cast Iron |
CVD coated carbide grade with a thick and smooth wear resistant coating and very hard substrate. Recommend for turning of grey cast irons (GCI) or hardened steels. |
| PH3215 |
CARBIDE |
CVD TiN Ti(C,N) |
|
M10-M25 |
Stainless Steel |
CVD coated grade for finishing to semi-finishing operations on stainless steels and Steels. Hard substrate, combined with a wear resistant and low friction coating makes this grade a first option for continuous cutting in Stainless Steels and can also work on Low Alloyed Steels. |
| PH3225 |
CARBIDE |
CVD TiN Ti(C,N) |
|
M15-M35 |
Stainless Steel |
CVD coated carbide grade with a wide range of applications on stainless steels from semi-finishing to roughing operations. This grade was designed to be applied with excellent results on austenitic stainless and duplex stainless steels at low to moderate cutting speeds. |
| PH3235 |
CARBIDE |
CVD TiN Ti(C,N) |
|
M25-M40 |
Stainless Steel |
CVD coated carbide grade designed for applications requiring good schock resistance at low to moderate speeds on stainless steels. The substrate promotes an excellent security on the cutting edge when applied on interrupted cutting. |
| PH3240 |
CARBIDE |
CVD TiN Ti(C,N) |
|
M30-M40 |
Stainless Steel |
CVD coated carbide grade the highest toughness designed to work on very demanding aplications (with heavy vibrations or very high depth of cut) at low speeds. |
| PH6125 |
CARBIDE |
PVD TiAlN SN |
|
P20-P30, S10-S20 |
Steel, High-Temp Alloys |
85° Parallelogram Milling Insert for Light to Heavy Milling in Hardened Steel and Stainless Steels (PVD) Coated |
| PH6135 |
CARBIDE |
PVD TiAlN SN |
|
P30-P40 |
Steel |
85° Parallelogram Milling Insert for Medium to Heavy Milling in Steel and Stainless Steel in Unstable Conditions (PVD) Coated |
| PH6215 |
CARBIDE |
PVD -TIAlN SN |
|
P10-P25, M10-M25 |
Steel, Stainless Steel |
PVD (TiAlN SN) coated carbide grade for semi-finishing of steels & stainless steels. |
| PH6225 |
CARBIDE |
PVD -TIAlN SN |
|
P15-P30, M15-M30 |
Steel, Stainless Steel |
PVD (TiAlN SN) thick coated carbide grade for roughing of steels. Performs well on variable cutting conditions machining |
| PH6315 |
CARBIDE |
PVD -TIAlN SN |
|
K10-K30 |
Cast Iron |
PVD (TiAlN SN) coated carbide grade designed for roughing of cast irons or nodular cast irons. |
| PH6705 |
CARBIDE |
PVD -TIAlN SN |
|
K05-K15, S05-S20 |
Cast Iron, High-Temp Alloys |
PVD (TiAlN SN) coated carbide grade with a hard substrate and very smooth surface. Ideal for high speed cutting of cast irons & HRSA. |
| PH6740 |
CARBIDE |
PVD -TIAlN SN |
|
P30-P50, M30-M50, K30-K40 |
Steel, Stainless Steel, Cast Iron |
PVD (TiAlN SN) large thickness coated grade for heavy roughing applications. Can work on all type of materials and endures a lot of vibration. |
| PH6903 |
CARBIDE |
PVD |
|
P01-PP10, H10-H20 |
Steel |
PVD coated sub micro-grain grade suitable for light finishing operations on Steels and hardened Steels. This is the first choice for finishing on Steel. |
| PH6910 |
CARBIDE |
PVD -TIAlN SN |
|
P05-P10, M05-M10 |
Steel, Stainless Steel |
PVD (TiAlN SN) coated carbide grade with a very hard micro grain substrate for light turning of steels and HRSA |
| PH6920 |
CARBIDE |
PVD -TIAlN |
|
P10-P35, M10-M25, S10-S30 |
Steel, Stainless Steel, Cast Iron |
An advanced PVD TiAlN coated grade over a tough wear resistance sub-micro substrate for general purpose machining of stainless steels & titanium alloys. |
| PH6930 |
CARBIDE |
PVD TiAlN SN |
|
P20-P40, M20-M30, K20-K40 |
Steel, Stainless Steel, Cast Iron |
Square Drilling Insert for Medium to Rough Cutting of Steel and Stainless Steels at Low to Medium Speeds (PVD) Coated |
