FILTER BY

Currently Shopping by

  1. Size Type: Remove This Item Metric
Size Type
  1. Inch (87)
  2. Metric (18)
Finish
  1. Uncoated (6)
  2. TiAlN (1)
  3. TiAlN (2)
  4. AlTiN (1)
Diameter
  1. 10.0 mm (3)
  2. 12.0 mm (1)
  3. 16.0 mm (3)
  4. 20.0 mm (4)
  5. 25.0 mm (3)
  6. 6.0 mm (1)
  7. 7.0 mm (1)
Price
  1. $11
    $102
Number of Flutes
  1. (1)
  2. (2)
  3. (8)
  4. (6)
  5. (1)

Excess Inventory - Metric

Excess Inventory - Metric

Items 1 to 15 of 18 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
1192163

Kennametal 10mm 2FL SE Carbide Square End Mill 1192163

$19.00

Kennametal 10mm 2FL SE Carbide Square End Mill 1192163
2406180

Kennametal 10mm 4FL SE Rough/Finisher Carbide End Mill, 4mm CR, 2406180

$39.00

Kennametal - 10mm Dia, 10mm Shank Dia, 15mm Length of Cut, 4 Flute, Solid Carbide, Single End, Corner Radius End, Roughing End Mill, TiAlN/TiN/TiAlN Coated, 76mm Overall Length, 38-degree Helix Angle, Centercutting, Extended Reach, MPN: 2406180
5658199

Kennametal 10mm 6FL SE Corner Radius Carbide End Mill 5658199

$20.00

Kennametal 5658199 10mm 6-FL Corner Radius Carbide End Mill
5658197

Kennametal 12mm 6FL SE Corner Radius Carbide End Mill 5658197

$29.00

Kennametal 5658197 12mm 6-FL Corner Radius Carbide End Mill
2417438

Kennametal 16mm 3FL Ball Nose, TiAlN Coated Carbide End Mill, 2417438

$86.50

Kennametal 16mm Dia, 16mm Length of Cut, 3 Flute, Solid Carbide, Ball End Mill, TiAlN Coated, Single End, 150mm Overall Length, 16mm Shank Diam, Spiral Flute, 35-degree Helix, 2417438
5654550

Kennametal 16mm 4FL SE Ball Nose Carbide End Mill 5654550

$34.00

Kennametal 16mm 4FL SE Ball Nose Carbide End Mill 5654550
5658197

Kennametal 16mm 6FL SE Corner Radius Carbide End Mill 5682156

$55.00

Kennametal 5682156 16mm 6-FL Corner Radius Carbide End Mill
5666354

Kennametal 2.4mm (0.0960) Carbide End Mill, TiAlN Coated, 5666354

$18.00

Kennametal 2.4mm (0.0960) Carbide End Mill, TiAlN Coated, 5666354
2406183

Kennametal 20mm 4FL SE Roughing Carbide End Mill, 4mm CR, TiALN 2406183

$90.00

Kennametal - 20mm Dia, 20mm Shank Dia, 30mm Length of Cut, 4 Flute, Solid Carbide, Single End, Corner Radius End, Roughing End Mill, TiAlN/TiN/TiAlN Coated, 115mm Overall Length, 38-degree Helix Angle, Centercutting, Extended Reach, MPN: 2406183
1192132

Kennametal 20mm 6FL SE (43mm LOC) Corner Chamfer Carbide End Mill 1192135

$101.50

Kennametal 20mm Mill Dia, 43mm Length of Cut, 6 Flute, Solid Carbide, Corner Chamfer End Mill, Uncoated, Single End, Spiral Flute, 30-degree Helix
1192132

Kennametal 20mm 6FL SE Corner Chamfer Carbide End Mill 1192132

$97.50

Kennametal 20mm Mill Dia, 38mm Length of Cut, 6 Flute, Solid Carbide, Corner Chamfer End Mill, Uncoated, Single End, Spiral Flute, 30-Degree Helix, MPN: 1192132, PKG QTY: 1 PC
5667501

Kennametal 20mm 8FL SE Corner Radius Carbide End Mill 5667501

$90.00

Kennametal 5667501 20mm 8-FL Corner Radius Carbide End Mill
5681980

Kennametal 25mm 3FL SE Carbide End Mill 5681980

$85.00

Kennametal 25mm 3FL SE Carbide End Mill 5681980
2406183

Kennametal 25mm 4FL SE Roughing Carbide End Mill, 3mm CR, TiALN, 2429691

$95.00

Kennametal - 25mm Dia, 25mm Shank Dia, 37.5mm Length of Cut, 4 Flute, Solid Carbide, Single End, 3mm Corner Radius End, Roughing End Mill, TiAlN/TiN/TiAlN Coated, 135mm Overall Length, 38-degree Helix Angle, Centercutting, Extended Reach, MPN: 2429691
2406183

Kennametal 25mm 4FL SE Roughing Carbide End Mill, 4mm CR TiALN, 2406184

$95.00

Kennametal - 25mm Dia, 25mm Shank Dia, 37.5mm Length of Cut, 4 Flute, Solid Carbide, Single End, Corner Radius End, Roughing End Mill, TiAlN/TiN/TiAlN Coated, 135mm Overall Length, 38° Helix Angle, Centercutting, Extended Reach, MPN: 2406184

Items 1 to 15 of 18 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction

E-Newsletter Signup

Enter your email address below to sign up for our e-newsletter