Excess Inventory

Excess Inventory

Items 1 to 15 of 21 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
4072203

Kennametal 1.00 4FL SE Harvi Carbide End Mill, 0.020 CR, ALTiN, 4072203

$49.99

Kennametal - 1 Inch Dia, 1-1/8 Inch Length of Cut, 4 Flute, Solid Carbide, Corner Chamfer (0.020End Mill, AlTiN Coated, 6 Inch Overall Length, 1 Inch Shank Dia, Spiral Flute, Variable Helix Angle
4072182

Kennametal 1.00 4FL SE Harvi Carbide End Mill, ALTiN Coated, 4072182

$49.99

Kennametal - 1 Inch Dia., 1-1/8 Inch Length of Cut, 4 Flute, Solid Carbide Square End Mill, Single End, AlTiN Coated, 1 Inch Shank Diam, 6 Inch Overall Length, Spiral Flute, 38-degree Helix, Center cutting
5360391

Kennametal 1.00 4FL SE Harvi Safelock .120 CR Carbide End Mill 5360391

$49.99

Kennametal 1.00 4FL SE Harvi Safelock .120 CR Carbide End Mill 5360391
5360390

Kennametal 1.00 4FL SE Harvi Safelock Carbide End Mill 5360390

$49.99

Kennametal 1.00 4-Flute SE Harvi Safelock Carbide End Mill 5360390
1718040

Kennametal 1/2 4FL SE Diamond Coated Carbide End Mill 1718040

$133.00

Kennametal 1/2 4FL SE Diamond Coated Carbide End Mill 1718040
5657938

Kennametal 1/4" 4FL SE (1-1/2 LOC) TiALN Carbide End Mill 5657938

$17.95

Kennametal 1/4" 4FL SE (1-1/2 LOC) TiALN Carbide End Mill 5657938
2406180

Kennametal 10mm 4FL SE Rough/Finisher Carbide End Mill, 4mm CR, 2406180

$29.00

Kennametal - 10mm Dia, 10mm Shank Dia, 15mm Length of Cut, 4 Flute, Solid Carbide, Single End, Corner Radius End, Roughing End Mill, TiAlN/TiN/TiAlN Coated, 76mm Overall Length, 38-degree Helix Angle, Centercutting, Extended Reach, MPN: 2406180
1257594

Kennametal 11/32 (0.1719) 4FL SE Ball Nose Carbide End Mill 1257594

$22.00

Kennametal 11/32 (0.1719) 4FL SE Ball Nose Carbide End Mill 1257594
1192169

Kennametal 12mm 4FL SE Carbide End Mill 1192169

$24.50

Kennametal 12mm 4FL SE Carbide End Mill 1192169
5654550

Kennametal 16mm 4FL SE Ball Nose Carbide End Mill 5654550

$17.00

Kennametal 16mm 4FL SE Ball Nose Carbide End Mill 5654550
5666354

Kennametal 2.4mm (0.0960) Carbide End Mill, TiAlN Coated, 5666354

$15.00

Kennametal 2.4mm (0.0960) Carbide End Mill, TiAlN Coated, 5666354
2406183

Kennametal 25mm 4FL SE Roughing Carbide End Mill, 3mm CR, TiALN, 2429691

$55.00

Kennametal - 25mm Dia, 25mm Shank Dia, 37.5mm Length of Cut, 4 Flute, Solid Carbide, Single End, 3mm Corner Radius End, Roughing End Mill, TiAlN/TiN/TiAlN Coated, 135mm Overall Length, 38-degree Helix Angle, Centercutting, Extended Reach, MPN: 2429691
2406183

Kennametal 25mm 4FL SE Roughing Carbide End Mill, 4mm CR TiALN, 2406184

$55.00

Kennametal - 25mm Dia, 25mm Shank Dia, 37.5mm Length of Cut, 4 Flute, Solid Carbide, Single End, Corner Radius End, Roughing End Mill, TiAlN/TiN/TiAlN Coated, 135mm Overall Length, 38° Helix Angle, Centercutting, Extended Reach, MPN: 2406184
Kennametal 3/8" 4FL SE (1-3/4 LOC) Carbide End Mill 5655672

Kennametal 3/8" 4FL SE (1-3/4 LOC) Carbide End Mill 5655672

$19.50

Kennametal 3/8" 4FL SE (1-3/4 LOC) Carbide End Mill 5655672
5062555

Kennametal 5/32 4FL DE Ball Nose Carbide End Mill 5062555

$11.95

Kennametal 5/32 4FL DE Ball Nose Carbide End Mill 5062555

Items 1 to 15 of 21 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction

E-Newsletter Signup

Enter your email address below to sign up for our e-newsletter