Ssangyong
Grade Descriptions

Grade Insert Material Coating Workpiece Materials Description / Application
SW400 CERAMIC SiC Whisker Steel High speed steel. High Chrome Steel in medium or low speed cutting. Roughing and medium cutting with heavy interrupted. Excellent flank and notch wear in high speed cutting.
SW800 CERAMIC SiC Whisker Steel Nickel Base alloy. Cobalt Base Alloy in high speed cutting. Roughing and finishing with continuous or light interrupted. Excellent flank and notch wear in high speed cutting.
ST100 CERAMIC Al2O3+TiC(N) Steel, Cast Iron Finishing for hardened steel and cast iron. Tougher alternative to ST300. High thermal shock resistance.
ST300 CERAMIC Al2O3+TiC(N) Steel, Cast Iron General machining for hardened steel and cast iron. Excellent wear resistance.
ST500 CERAMIC Al2O3+TiC(N) Steel, Cast Iron Fine finishing for hardened steel and cast iron. Alternative to PCBN fine microstructure.
ST700 CERAMIC Al2O3+TiC(N) Steel, Cast Iron Fine finishing for hardened steel and cast iron in high speed.Excellent wear and themal shock resistance.
TC100 CERAMIC TiN Steel, Cast Iron TiN coated on ST100 grade. Wear resistance improved.
TC300 CERAMIC TiN Steel, Cast Iron TiN coated on ST300 grade. Wear resistance improved.
SD200 CERAMIC TiC+Al203 Cast Iron Turning and milling for ductile cast iron in finish. High thermal shock resistance. Usable with coolant.
SZ200 CERAMIC Al2O3+ZrO2 Cast Iron, Steel Medium cutting for cast iron.Toughened by zirconia, high chemical stability.
SZ300 CERAMIC Al2O3+ZrO3 Cast Iron, Steel Medium cutting for high hardness cast iron. Harder alternative to SZ200.
SN26 CERAMIC Si3N4 Cast Iron Roughing and interrupted cutting for cast iron. Good toughness and thermal shock resistance. Well balanced wear resistance and toughness.
SN300 CERAMIC Si3N5 Cast Iron Roughing and heavy interrupted cutting for cast iron. Tougher alternative to SN400. Thermal shock resistance and good toughness.
SN400 CERAMIC Si3N6 Cast Iron General maching for cast iron. Excellent wear reistance in high speed cutting.
SN500 CERAMIC Si3N7 Cast Iron Roughing for hard material in high speed. Harder alternative to SN400. Improeved wear resistance at high cutting speed.
SN600 CERAMIC Si3N8 Cast Iron Roughing for hard material with interrupted in high speed. Excellent wear resistance in interrupted cutting.
SN800 (SiAlon) CERAMIC Si3N9 High-Temp Alloys, Non-ferrous Materials, Inconel General maching for high temperature alloy and inconel (Dry). Advanced grade with SAlON contained superior edge strength.
SN900 (SiAlon) CERAMIC Si3N10 High-Temp Alloys, Non-ferrous Materials, Inconel General machining for high temperature alloy and inconel (Wet). Excellent thermal shock resistance and thermal conductivity.
TX510 CERMET TiCN Steel Finishing and boring for steel. Excellent wear resistance. Outstanding surface finish TiCN. Fine finishing and boring for steel.
TX515 CERMET TiCN Steel Finishing and boring for carbon and alloy steel. Wear resistance and high mechanical strength TiCN.
TX520 CERMET TiCN Steel General machining and bearing for steel. First choice for machining steel. Turning, grooving, boring and bearing for steel. Excellent thermal conductivity and wear resistance.
TX530 CERMET TiCN Steel General application for milling. The toughest cermet grade TiCN. Wide range of milling for steel materials.
TX910 CERMET TX510+TiN PVD Steel TiN Coated on TX510 Grade.TiN Coating. Fine finishing and boring for steel.
TX915 CERMET TX515+TiN PVD Steel TiN Coated on TX515 Grade.
TX920 CERMET TX520+TiN PVD Steel TiN Coated on TX520 Grade. First choice for machining steel. Turning, grooving, boring and bearing for steel.
TX930 CERMET TX530+TiN PVD Steel TiN Coated on TX530 Grade. Wide range of milling for steel materials.
SBN1000 CBN - POLYCRYSTALLINE   Cast Iron, High-Temp Alloys Medium and fininshing for cast iron. Ultra high hardness, its hardness is up to 3.900 Hv. Content of CBN: 95%. Ultra cutting speed for cast iron roughing to finishing. Machining chilled cast irons and high chrom alloy steel.
SBN2000 CBN - POLYCRYSTALLINE   Steel, Hardened Materials Continuous cutting for hardened steel. Machinig for continuous cut of hardened steel. Its hardness is up to 2.700 Hv. Content of CBN: 50%. Precision finishing of hardened steel. Recommended to use for hard materials, Bearing steel, forged steel and high speed steel.
SBN3000 CBN - POLYCRYSTALLINE   Steel, Hardened Materials Moderately interrupted turning and finishing milling for steel. Best combination of wear resistance and toughness. Its hardness is up to 2.700 Hv. Content of CBN 60%. General purpose of turning and milling for hardened steel.
SBN4000 CBN - POLYCRYSTALLINE   Hardened Materials Heavily interrupted cutting of hardened steel. Good resistance to crater and flank wear. Its hardness is up to 2.900 Hv. Content of CBN 65%.
SBN5000 CBN - POLYCRYSTALLINE   Cast Iron Solid PCBN for cast iron. Extreme wear resistance. Solid CBN. Content of CBN: 93%. Rough machining of cast iron powder metal alloy.
SPD1000 PCD   High-Temp Alloys Machining for extemely abrasive materials (plastic composites). Machining with fine surface finish. Particle size: 4~5µm. Machinig of aluminum and wood. Gives fine surface finish in turning operation.
SPD2000 PCD   High-Temp Alloys General machining for aluminum alloys and copper. Ultra high hardness. Great wear resistance. Particle size: 8~9µm. The first choice of PCD grades, turning operation of aluminum and copper alloy. Machining aluminum alloy with lower percentage of Si.
SPD3000 PCD   High-Temp Alloys Machining for aluminum alloys(>11%Si) and sintered carbide. Machining wither interruption. Particle size: 15-22µm. Milling operation of aluminum alloy. Machining of ultra fine alloy and powder sinterede metal cutting of composites.

CETS E-Newsletter

Enter your email address below to sign up for our e-newsletter